001: /*
002: * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.
003: *
004: * Copyright 1997-2007 Sun Microsystems, Inc. All rights reserved.
005: *
006: * The contents of this file are subject to the terms of either the GNU
007: * General Public License Version 2 only ("GPL") or the Common
008: * Development and Distribution License("CDDL") (collectively, the
009: * "License"). You may not use this file except in compliance with the
010: * License. You can obtain a copy of the License at
011: * http://www.netbeans.org/cddl-gplv2.html
012: * or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
013: * specific language governing permissions and limitations under the
014: * License. When distributing the software, include this License Header
015: * Notice in each file and include the License file at
016: * nbbuild/licenses/CDDL-GPL-2-CP. Sun designates this
017: * particular file as subject to the "Classpath" exception as provided
018: * by Sun in the GPL Version 2 section of the License file that
019: * accompanied this code. If applicable, add the following below the
020: * License Header, with the fields enclosed by brackets [] replaced by
021: * your own identifying information:
022: * "Portions Copyrighted [year] [name of copyright owner]"
023: *
024: * Contributor(s):
025: *
026: * The Original Software is NetBeans. The Initial Developer of the Original
027: * Software is Sun Microsystems, Inc. Portions Copyright 1997-2007 Sun
028: * Microsystems, Inc. All Rights Reserved.
029: *
030: * If you wish your version of this file to be governed by only the CDDL
031: * or only the GPL Version 2, indicate your decision by adding
032: * "[Contributor] elects to include this software in this distribution
033: * under the [CDDL or GPL Version 2] license." If you do not indicate a
034: * single choice of license, a recipient has the option to distribute
035: * your version of this file under either the CDDL, the GPL Version 2 or
036: * to extend the choice of license to its licensees as provided above.
037: * However, if you add GPL Version 2 code and therefore, elected the GPL
038: * Version 2 license, then the option applies only if the new code is
039: * made subject to such option by the copyright holder.
040: */
041:
042: package org.netbeans.test.uml.cdfs;
043:
044: import org.netbeans.test.uml.cdfs.utils.CDFSUtil;
045: import org.netbeans.jellytools.nodes.Node;
046: import org.netbeans.jemmy.EventTool;
047: import org.netbeans.jemmy.TimeoutExpiredException;
048: import org.netbeans.junit.NbTestSuite;
049: import org.netbeans.test.umllib.DiagramElementOperator;
050: import org.netbeans.test.umllib.DiagramOperator;
051: import org.netbeans.test.umllib.NewDiagramWizardOperator;
052: import org.netbeans.test.umllib.project.Project;
053: import org.netbeans.test.umllib.testcases.UMLTestCase;
054:
055: public class DeploymentElementsCDFSTests extends UMLTestCase {
056:
057: private EventTool eventTool = new EventTool();
058:
059: public DeploymentElementsCDFSTests(String name) {
060: super (name);
061: }
062:
063: public static NbTestSuite suite() {
064: NbTestSuite suite = new NbTestSuite(
065: DeploymentElementsCDFSTests.class);
066: return suite;
067: }
068:
069: /******************const section*************************/
070: private String PROJECT_NAME = "CDFS_uml";
071: private String EXCEPTION_DLG = "Exception";
072: /********************************************************/
073:
074: private static boolean isNotInitialized = true;
075: CDFSUtil util = new CDFSUtil(PROJECT_NAME);
076:
077: public void testCDFSArtifact() {
078: final String PATH_TO_OBJ = "Model|DeplArtifact";
079: final String OBJ_NAME = "DeplArtifact";
080: final String DIA_NAME = "Dpl_DplArtfct";
081: final String DIA_PATH = "Model|" + DIA_NAME;
082: util = new CDFSUtil(PROJECT_NAME, this );
083:
084: Node node = util.getNode(PATH_TO_OBJ);
085: util.createDiagram(new Node[] { node },
086: NewDiagramWizardOperator.DEPLOYMENT_DIAGRAM, DIA_NAME);
087:
088: //checking diagram was opened
089: DiagramOperator dia = new DiagramOperator(DIA_NAME);
090: DiagramElementOperator comp = new DiagramElementOperator(dia,
091: OBJ_NAME);
092:
093: //checking only required elements are present on diagram
094: if (!util.diagramHasExactElements(
095: new DiagramElementOperator[] { comp }, dia)) {
096: fail("testCDFSArtifact verification failed");
097: }
098:
099: //checking diagram node was created
100: /*
101: if (!util.nodeExists(DIA_PATH)){
102: eventTool.waitNoEvent(5000);
103: fail("testCDFSArtifact verification failed");
104: }
105: */
106:
107: }
108:
109: public void testCDFSComponent() {
110: final String PATH_TO_OBJ = "Model|DeplComponent";
111: final String OBJ_NAME = "DeplComponent";
112: final String DIA_NAME = "Dpl_DplCmpnnt";
113: final String DIA_PATH = "Model|" + DIA_NAME;
114: util = new CDFSUtil(PROJECT_NAME, this );
115:
116: Node node = util.getNode(PATH_TO_OBJ);
117: util.createDiagram(new Node[] { node },
118: NewDiagramWizardOperator.DEPLOYMENT_DIAGRAM, DIA_NAME);
119:
120: //checking diagram was opened
121: DiagramOperator dia = new DiagramOperator(DIA_NAME);
122: DiagramElementOperator comp = new DiagramElementOperator(dia,
123: OBJ_NAME);
124:
125: //checking only required elements are present on diagram
126: if (!util.diagramHasExactElements(
127: new DiagramElementOperator[] { comp }, dia)) {
128: fail("testCDFSComponent verification failed");
129: }
130:
131: //checking diagram node was created
132: /*
133: if (!util.nodeExists(DIA_PATH)){
134: eventTool.waitNoEvent(5000);
135: fail("testCDFSComponent verification failed");
136: }
137: */
138:
139: }
140:
141: public void testCDFSDeploymentSpec() {
142: final String PATH_TO_OBJ = "Model|DeploymentSpec";
143: final String OBJ_NAME = "DeploymentSpec";
144: final String DIA_NAME = "Dpl_DplSpc";
145: final String DIA_PATH = "Model|" + DIA_NAME;
146: util = new CDFSUtil(PROJECT_NAME, this );
147:
148: Node node = util.getNode(PATH_TO_OBJ);
149: util.createDiagram(new Node[] { node },
150: NewDiagramWizardOperator.DEPLOYMENT_DIAGRAM, DIA_NAME);
151:
152: //checking diagram was opened
153: DiagramOperator dia = new DiagramOperator(DIA_NAME);
154: DiagramElementOperator comp = null;
155:
156: comp = new DiagramElementOperator(dia, OBJ_NAME);
157:
158: //checking only required elements are present on diagram
159: if (!util.diagramHasExactElements(
160: new DiagramElementOperator[] { comp }, dia)) {
161: fail("created diagram has unexpected elements");
162: }
163:
164: //checking diagram node was created
165: /*
166: if (!util.nodeExists(DIA_PATH)){
167: eventTool.waitNoEvent(5000);
168: fail("testCDFSStateAborted verification failed");
169: }
170: */
171:
172: }
173:
174: public void testCDFSNode() {
175: final String PATH_TO_OBJ = "Model|Node";
176: final String OBJ_NAME = "Node";
177: final String DIA_NAME = "Dpl_Nde";
178: final String DIA_PATH = "Model|" + DIA_NAME;
179: util = new CDFSUtil(PROJECT_NAME, this );
180:
181: Node node = util.getNode(PATH_TO_OBJ);
182: util.createDiagram(new Node[] { node },
183: NewDiagramWizardOperator.DEPLOYMENT_DIAGRAM, DIA_NAME);
184:
185: //checking diagram was opened
186: DiagramOperator dia = new DiagramOperator(DIA_NAME);
187: DiagramElementOperator comp = new DiagramElementOperator(dia,
188: OBJ_NAME);
189:
190: //checking only required elements are present on diagram
191: if (!util.diagramHasExactElements(
192: new DiagramElementOperator[] { comp }, dia)) {
193: fail("testCDFSNode verification failed");
194: }
195:
196: //checking diagram node was created
197: /*
198: if (!util.nodeExists(DIA_PATH)){
199: eventTool.waitNoEvent(5000);
200: fail("testCDFSNode verification failed");
201: }
202: */
203:
204: }
205:
206: protected void setUp() {
207: if (isNotInitialized) {
208: Project.openProject(CDFSUtil.CDFS_XTEST_PROJECT_DIR + "/"
209: + PROJECT_NAME);
210: isNotInitialized = false;
211: }
212: }
213:
214: public void tearDown() {
215: closeAllModal();
216: org.netbeans.test.umllib.util.Utils.tearDown();
217: new EventTool().waitNoEvent(1000);
218: try {
219: DiagramOperator d = new DiagramOperator("Dpl");
220: d.closeAllDocuments();
221: } catch (TimeoutExpiredException tee) {
222: }
223:
224: new EventTool().waitNoEvent(1000);
225: }
226:
227: }
|