#! python
# Python Serial Port Extension for Win32, Linux, BSD, Jython
# see __init__.py
#
# (C) 2001-2009 Chris Liechti <cliechti@gmx.net>
# this is distributed under a free software license, see license.txt
# compatibility folder Python < 2.6
try:
bytes
bytearray
except (NameError, AttributeError):
# Python older than 2.6 do not have these types. Like for Python 2.6 they
# should behave like str. For Python older than 3.0 we want to work with
# strings anyway, only later versions have a true bytes type.
bytes = str
# bytearray is a mutable type that is easily turned into an instance of
# bytes
class bytearray(list):
# for bytes(bytearray()) usage
def __str__(self): return ''.join(self)
# append automatically converts integers to characters
def append(self, item):
if isinstance(item, str):
list.append(self, item)
else:
list.append(self, chr(item))
# +=
def __iadd__(self, other):
for byte in other:
self.append(byte)
return self
# all Python versions prior 3.x convert str([17]) to '[17]' instead of '\x11'
# so a simple bytes(sequence) doesn't work for all versions
def to_bytes(seq):
"""convert a sequence to a bytes type"""
b = bytearray()
for item in seq:
b.append(item) # this one handles int and str
return bytes(b)
# create control bytes
XON = to_bytes([17])
XOFF = to_bytes([19])
PARITY_NONE, PARITY_EVEN, PARITY_ODD, PARITY_MARK, PARITY_SPACE = 'N', 'E', 'O', 'M', 'S'
STOPBITS_ONE, STOPBITS_ONE_POINT_FIVE, STOPBITS_TWO = (1, 1.5, 2)
FIVEBITS, SIXBITS, SEVENBITS, EIGHTBITS = (5, 6, 7, 8)
PARITY_NAMES = {
PARITY_NONE: 'None',
PARITY_EVEN: 'Even',
PARITY_ODD: 'Odd',
PARITY_MARK: 'Mark',
PARITY_SPACE: 'Space',
}
class SerialException(IOError):
"""Base class for serial port related exceptions."""
class SerialTimeoutException(SerialException):
"""Write timeouts give an exception"""
writeTimeoutError = SerialTimeoutException("Write timeout")
portNotOpenError = ValueError('Attempting to use a port that is not open')
class FileLike(object):
"""An abstract file like class.
This class implements readline and readlines based on read and
writelines based on write.
This class is used to provide the above functions for to Serial
port objects.
Note that when the serial port was opened with _NO_ timeout that
readline blocks until it sees a newline (or the specified size is
reached) and that readlines would never return and therefore
refuses to work (it raises an exception in this case)!
"""
def __init__(self):
self.closed = True
def close(self):
self.closed = True
# so that ports are closed when objects are discarded
def __del__(self):
"""Destructor. Calls close()."""
# The try/except block is in case this is called at program
# exit time, when it's possible that globals have already been
# deleted, and then the close() call might fail. Since
# there's nothing we can do about such failures and they annoy
# the end users, we suppress the traceback.
try:
self.close()
except:
pass
def writelines(self, sequence):
for line in sequence:
self.write(line)
def flush(self):
"""flush of file like objects"""
pass
# iterator for e.g. "for line in Serial(0): ..." usage
def next(self):
line = self.readline()
if not line: raise StopIteration
return line
def __iter__(self):
return self
# other functions of file-likes - not used by pySerial
#~ readinto(b)
def seek(self, pos, whence=0):
raise IOError("file is not seekable")
def tell(self):
raise IOError("file is not seekable")
def truncate(self, n=None):
raise IOError("file is not seekable")
def isatty(self):
return False
class SerialBase(object):
"""Serial port base class. Provides __init__ function and properties to
get/set port settings."""
# default values, may be overridden in subclasses that do not support all values
BAUDRATES = (50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000,
576000, 921600, 1000000, 1152000, 1500000, 2000000, 2500000,
3000000, 3500000, 4000000)
BYTESIZES = (FIVEBITS, SIXBITS, SEVENBITS, EIGHTBITS)
PARITIES = (PARITY_NONE, PARITY_EVEN, PARITY_ODD, PARITY_MARK, PARITY_SPACE)
STOPBITS = (STOPBITS_ONE, STOPBITS_ONE_POINT_FIVE, STOPBITS_TWO)
def __init__(self,
port = None, # number of device, numbering starts at
# zero. if everything fails, the user
# can specify a device string, note
# that this isn't portable anymore
# port will be opened if one is specified
baudrate=9600, # baud rate
bytesize=EIGHTBITS, # number of data bits
parity=PARITY_NONE, # enable parity checking
stopbits=STOPBITS_ONE, # number of stop bits
timeout=None, # set a timeout value, None to wait forever
xonxoff=0, # enable software flow control
rtscts=0, # enable RTS/CTS flow control
writeTimeout=None, # set a timeout for writes
dsrdtr=None, # None: use rtscts setting, dsrdtr override if true or false
interCharTimeout=None # Inter-character timeout, None to disable
):
"""Initialize comm port object. If a port is given, then the port will be
opened immediately. Otherwise a Serial port object in closed state
is returned."""
self._isOpen = False
self._port = None # correct value is assigned below through properties
self._baudrate = None # correct value is assigned below through properties
self._bytesize = None # correct value is assigned below through properties
self._parity = None # correct value is assigned below through properties
self._stopbits = None # correct value is assigned below through properties
self._timeout = None # correct value is assigned below through properties
self._writeTimeout = None # correct value is assigned below through properties
self._xonxoff = None # correct value is assigned below through properties
self._rtscts = None # correct value is assigned below through properties
self._dsrdtr = None # correct value is assigned below through properties
self._interCharTimeout = None # correct value is assigned below through properties
# assign values using get/set methods using the properties feature
self.port = port
self.baudrate = baudrate
self.bytesize = bytesize
self.parity = parity
self.stopbits = stopbits
self.timeout = timeout
self.writeTimeout = writeTimeout
self.xonxoff = xonxoff
self.rtscts = rtscts
self.dsrdtr = dsrdtr
self.interCharTimeout = interCharTimeout
if port is not None:
self.open()
def isOpen(self):
"""Check if the port is opened."""
return self._isOpen
# - - - - - - - - - - - - - - - - - - - - - - - -
# TODO: these are not really needed as the is the BAUDRATES etc. attribute...
# maybe i remove them before the final release...
def getSupportedBaudrates(self):
return [(str(b), b) for b in self.BAUDRATES]
def getSupportedByteSizes(self):
return [(str(b), b) for b in self.BYTESIZES]
def getSupportedStopbits(self):
return [(str(b), b) for b in self.STOPBITS]
def getSupportedParities(self):
return [(PARITY_NAMES[b], b) for b in self.PARITIES]
# - - - - - - - - - - - - - - - - - - - - - - - -
def setPort(self, port):
"""Change the port. The attribute portstr is set to a string that
contains the name of the port."""
was_open = self._isOpen
if was_open: self.close()
if port is not None:
if isinstance(port, basestring):
self.portstr = port
else:
self.portstr = self.makeDeviceName(port)
else:
self.portstr = None
self._port = port
self.name = self.portstr
if was_open: self.open()
def getPort(self):
"""Get the current port setting. The value that was passed on init or using
setPort() is passed back. See also the attribute portstr which contains
the name of the port as a string."""
return self._port
port = property(getPort, setPort, doc="Port setting")
def setBaudrate(self, baudrate):
"""Change baud rate. It raises a ValueError if the port is open and the
baud rate is not possible. If the port is closed, then the value is
accepted and the exception is raised when the port is opened."""
try:
self._baudrate = int(baudrate)
except TypeError:
raise ValueError("Not a valid baudrate: %r" % (baudrate,))
else:
if self._isOpen: self._reconfigurePort()
def getBaudrate(self):
"""Get the current baud rate setting."""
return self._baudrate
baudrate = property(getBaudrate, setBaudrate, doc="Baud rate setting")
def setByteSize(self, bytesize):
"""Change byte size."""
if bytesize not in self.BYTESIZES: raise ValueError("Not a valid byte size: %r" % (bytesize,))
self._bytesize = bytesize
if self._isOpen: self._reconfigurePort()
def getByteSize(self):
"""Get the current byte size setting."""
return self._bytesize
bytesize = property(getByteSize, setByteSize, doc="Byte size setting")
def setParity(self, parity):
"""Change parity setting."""
if parity not in self.PARITIES: raise ValueError("Not a valid parity: %r" % (parity,))
self._parity = parity
if self._isOpen: self._reconfigurePort()
def getParity(self):
"""Get the current parity setting."""
return self._parity
parity = property(getParity, setParity, doc="Parity setting")
def setStopbits(self, stopbits):
"""Change stop bits size."""
if stopbits not in self.STOPBITS: raise ValueError("Not a valid stop bit size: %r" % (stopbits,))
self._stopbits = stopbits
if self._isOpen: self._reconfigurePort()
def getStopbits(self):
"""Get the current stop bits setting."""
return self._stopbits
stopbits = property(getStopbits, setStopbits, doc="Stop bits setting")
def setTimeout(self, timeout):
"""Change timeout setting."""
if timeout is not None:
try:
timeout + 1 # test if it's a number, will throw a TypeError if not...
except TypeError:
raise ValueError("Not a valid timeout: %r" % (timeout,))
if timeout < 0: raise ValueError("Not a valid timeout: %r" % (timeout,))
self._timeout = timeout
if self._isOpen: self._reconfigurePort()
def getTimeout(self):
"""Get the current timeout setting."""
return self._timeout
timeout = property(getTimeout, setTimeout, doc="Timeout setting for read()")
def setWriteTimeout(self, timeout):
"""Change timeout setting."""
if timeout is not None:
if timeout < 0: raise ValueError("Not a valid timeout: %r" % (timeout,))
try:
timeout + 1 #test if it's a number, will throw a TypeError if not...
except TypeError:
raise ValueError("Not a valid timeout: %r" % timeout)
self._writeTimeout = timeout
if self._isOpen: self._reconfigurePort()
def getWriteTimeout(self):
"""Get the current timeout setting."""
return self._writeTimeout
writeTimeout = property(getWriteTimeout, setWriteTimeout, doc="Timeout setting for write()")
def setXonXoff(self, xonxoff):
"""Change XON/XOFF setting."""
self._xonxoff = xonxoff
if self._isOpen: self._reconfigurePort()
def getXonXoff(self):
"""Get the current XON/XOFF setting."""
return self._xonxoff
xonxoff = property(getXonXoff, setXonXoff, doc="XON/XOFF setting")
def setRtsCts(self, rtscts):
"""Change RTS/CTS flow control setting."""
self._rtscts = rtscts
if self._isOpen: self._reconfigurePort()
def getRtsCts(self):
"""Get the current RTS/CTS flow control setting."""
return self._rtscts
rtscts = property(getRtsCts, setRtsCts, doc="RTS/CTS flow control setting")
def setDsrDtr(self, dsrdtr=None):
"""Change DsrDtr flow control setting."""
if dsrdtr is None:
# if not set, keep backwards compatibility and follow rtscts setting
self._dsrdtr = self._rtscts
else:
# if defined independently, follow its value
self._dsrdtr = dsrdtr
if self._isOpen: self._reconfigurePort()
def getDsrDtr(self):
"""Get the current DSR/DTR flow control setting."""
return self._dsrdtr
dsrdtr = property(getDsrDtr, setDsrDtr, "DSR/DTR flow control setting")
def setInterCharTimeout(self, interCharTimeout):
"""Change inter-character timeout setting."""
if interCharTimeout is not None:
if interCharTimeout < 0: raise ValueError("Not a valid timeout: %r" % interCharTimeout)
try:
interCharTimeout + 1 # test if it's a number, will throw a TypeError if not...
except TypeError:
raise ValueError("Not a valid timeout: %r" % interCharTimeout)
self._interCharTimeout = interCharTimeout
if self._isOpen: self._reconfigurePort()
def getInterCharTimeout(self):
"""Get the current inter-character timeout setting."""
return self._interCharTimeout
interCharTimeout = property(getInterCharTimeout, setInterCharTimeout, doc="Inter-character timeout setting for read()")
# - - - - - - - - - - - - - - - - - - - - - - - -
_SETTINGS = ('baudrate', 'bytesize', 'parity', 'stopbits', 'xonxoff',
'dsrdtr', 'rtscts', 'timeout', 'writeTimeout', 'interCharTimeout')
def getSettingsDict(self):
"""Get current port settings as a dictionary. For use with
applySettingsDict"""
return dict([(key, getattr(self, '_'+key)) for key in self._SETTINGS])
def applySettingsDict(self, d):
"""apply stored settings from a dictionary returned from
getSettingsDict. it's allowed to delete keys from the dictionary. these
values will simply left unchanged."""
for key in self._SETTINGS:
if d[key] != getattr(self, '_'+key): # check against internal "_" value
setattr(self, key, d[key]) # set non "_" value to use properties write function
# - - - - - - - - - - - - - - - - - - - - - - - -
def __repr__(self):
"""String representation of the current port settings and its state."""
return "%s<id=0x%x, open=%s>(port=%r, baudrate=%r, bytesize=%r, parity=%r, stopbits=%r, timeout=%r, xonxoff=%r, rtscts=%r, dsrdtr=%r)" % (
self.__class__.__name__,
id(self),
self._isOpen,
self.portstr,
self.baudrate,
self.bytesize,
self.parity,
self.stopbits,
self.timeout,
self.xonxoff,
self.rtscts,
self.dsrdtr,
)
# - - - - - - - - - - - - - - - - - - - - - - - -
def readline(self, size=None, eol='\n'):
"""read a line which is terminated with end-of-line (eol) character
('\n' by default) or until timeout"""
line = ''
while 1:
c = self.read(1)
if c:
line += c # not very efficient but lines are usually not that long
if c == eol:
break
if size is not None and len(line) >= size:
break
else:
break
return bytes(line)
def readlines(self, sizehint=None, eol='\n'):
"""read a list of lines, until timeout
sizehint is ignored"""
if self.timeout is None:
raise ValueError("Serial port MUST have enabled timeout for this function!")
lines = []
while 1:
line = self.readline(eol=eol)
if line:
lines.append(line)
if line[-1] != eol: # was the line received with a timeout?
break
else:
break
return lines
def xreadlines(self, sizehint=None):
"""just call readlines - here for compatibility"""
return self.readlines()
# - - - - - - - - - - - - - - - - - - - - - - - -
# compatibility with io library
def readable(self): return True
def writable(self): return True
def seekable(self): return False
def readinto(self, b):
data = self.read(len(b))
n = len(data)
try:
b[:n] = data
except TypeError, err:
import array
if not isinstance(b, array.array):
raise err
b[:n] = array.array('b', data)
return n
if __name__ == '__main__':
import sys
s = SerialBase()
sys.stdout.write('port name: %s\n' % s.portstr)
sys.stdout.write('baud rates: %s\n' % s.getSupportedBaudrates())
sys.stdout.write('byte sizes: %s\n' % s.getSupportedByteSizes())
sys.stdout.write('parities: %s\n' % s.getSupportedParities())
sys.stdout.write('stop bits: %s\n' % s.getSupportedStopbits())
sys.stdout.write('%s\n' % s)
|