"""
Real spectrum tranforms (DCT, DST, MDCT)
"""
__all__ = ['dct', 'idct']
import numpy as np
from scipy.fftpack import _fftpack
import atexit
atexit.register(_fftpack.destroy_ddct1_cache)
atexit.register(_fftpack.destroy_ddct2_cache)
atexit.register(_fftpack.destroy_dct1_cache)
atexit.register(_fftpack.destroy_dct2_cache)
def dct(x, type=2, n=None, axis=-1, norm=None):
"""
Return the Discrete Cosine Transform of arbitrary type sequence x.
Parameters
----------
x : array-like
The input array.
type : {1, 2, 3}, optional
Type of the DCT (see Notes). Default type is 2.
n : int, optional
Length of the transform.
axis : int, optional
Axis over which to compute the transform.
norm : {None, 'ortho'}, optional
Normalization mode (see Notes). Default is None.
Returns
-------
y : ndarray of real
The transformed input array.
See Also
--------
idct
Notes
-----
For a single dimension array ``x``, ``dct(x, norm='ortho')`` is equal to
matlab ``dct(x)``.
There are theoretically 8 types of the DCT, only the first 3 types are
implemented in scipy. 'The' DCT generally refers to DCT type 2, and 'the'
Inverse DCT generally refers to DCT type 3.
type I
~~~~~~
There are several definitions of the DCT-I; we use the following
(for ``norm=None``)::
N-2
y[k] = x[0] + (-1)**k x[N-1] + 2 * sum x[n]*cos(pi*k*n/(N-1))
n=1
Only None is supported as normalization mode for DCT-I. Note also that the
DCT-I is only supported for input size > 1
type II
~~~~~~~
There are several definitions of the DCT-II; we use the following
(for ``norm=None``)::
N-1
y[k] = 2* sum x[n]*cos(pi*k*(2n+1)/(2*N)), 0 <= k < N.
n=0
If ``norm='ortho'``, ``y[k]`` is multiplied by a scaling factor `f`::
f = sqrt(1/(4*N)) if k = 0,
f = sqrt(1/(2*N)) otherwise.
Which makes the corresponding matrix of coefficients orthonormal
(``OO' = Id``).
type III
~~~~~~~~
There are several definitions, we use the following
(for ``norm=None``)::
N-1
y[k] = x[0] + 2 * sum x[n]*cos(pi*(k+0.5)*n/N), 0 <= k < N.
n=1
or, for ``norm='ortho'`` and 0 <= k < N::
N-1
y[k] = x[0] / sqrt(N) + sqrt(1/N) * sum x[n]*cos(pi*(k+0.5)*n/N)
n=1
The (unnormalized) DCT-III is the inverse of the (unnormalized) DCT-II, up
to a factor `2N`. The orthonormalized DCT-III is exactly the inverse of
the orthonormalized DCT-II.
References
----------
http://en.wikipedia.org/wiki/Discrete_cosine_transform
'A Fast Cosine Transform in One and Two Dimensions', by J. Makhoul, `IEEE
Transactions on acoustics, speech and signal processing` vol. 28(1),
pp. 27-34, http://dx.doi.org/10.1109/TASSP.1980.1163351 (1980).
"""
if type == 1 and norm is not None:
raise NotImplementedError(
"Orthonormalization not yet supported for DCT-I")
return _dct(x, type, n, axis, normalize=norm)
def idct(x, type=2, n=None, axis=-1, norm=None):
"""
Return the Inverse Discrete Cosine Transform of arbitrary type sequence x.
Parameters
----------
x : array-like
The input array.
type : {1, 2, 3}, optional
Type of the DCT (see Notes). Default type is 2.
n : int, optional
Length of the transform.
axis : int, optional
Axis over which to compute the transform.
norm : {None, 'ortho'}, optional
Normalization mode (see Notes). Default is None.
Returns
-------
y : ndarray of real
The transformed input array.
See Also
--------
dct
Notes
-----
For a single dimension array `x`, ``idct(x, norm='ortho')`` is equal to
matlab ``idct(x)``.
'The' IDCT is the IDCT of type 2, which is the same as DCT of type 3.
IDCT of type 1 is the DCT of type 1, IDCT of type 2 is the DCT of type 3,
and IDCT of type 3 is the DCT of type 2. For the definition of these types,
see `dct`.
"""
if type == 1 and norm is not None:
raise NotImplementedError(
"Orthonormalization not yet supported for IDCT-I")
# Inverse/forward type table
_TP = {1:1, 2:3, 3:2}
return _dct(x, _TP[type], n, axis, normalize=norm)
def _dct(x, type, n=None, axis=-1, overwrite_x=0, normalize=None):
"""
Return Discrete Cosine Transform of arbitrary type sequence x.
Parameters
----------
x : array-like
input array.
n : int, optional
Length of the transform.
axis : int, optional
Axis along which the dct is computed. (default=-1)
overwrite_x : bool, optional
If True the contents of x can be destroyed. (default=False)
Returns
-------
z : real ndarray
"""
tmp = np.asarray(x)
if not np.isrealobj(tmp):
raise TypeError,"1st argument must be real sequence"
if n is None:
n = tmp.shape[axis]
else:
raise NotImplemented("Padding/truncating not yet implemented")
if tmp.dtype == np.double:
if type == 1:
f = _fftpack.ddct1
elif type == 2:
f = _fftpack.ddct2
elif type == 3:
f = _fftpack.ddct3
else:
raise ValueError("Type %d not understood" % type)
elif tmp.dtype == np.float32:
if type == 1:
f = _fftpack.dct1
elif type == 2:
f = _fftpack.dct2
elif type == 3:
f = _fftpack.dct3
else:
raise ValueError("Type %d not understood" % type)
else:
raise ValueError("dtype %s not supported" % tmp.dtype)
if normalize:
if normalize == "ortho":
nm = 1
else:
raise ValueError("Unknown normalize mode %s" % normalize)
else:
nm = 0
if type == 1 and n < 2:
raise ValueError("DCT-I is not defined for size < 2")
if axis == -1 or axis == len(tmp.shape) - 1:
return f(tmp, n, nm, overwrite_x)
#else:
# raise NotImplementedError("Axis arg not yet implemented")
tmp = np.swapaxes(tmp, axis, -1)
tmp = f(tmp, n, nm, overwrite_x)
return np.swapaxes(tmp, axis, -1)
|